EPC1530_QR
Sep. 15, 2026
Capacitor Information
EPC1530 · Hybrid Pulse Capacitor · Rechargeable
Language: English
Product Information
| Brand | SUNJ |
|---|---|
| Model | EPC1530 |
| Product type | Hybrid pulse capacitor |
| Rechargeability | Rechargeable within the conditions specified by SUNJ |
| Maximum dimensions | 14.4 mm diameter × 27.5 mm height (maximum) |
| Maximum charging voltage | 3.95 V |
| Discharge cut-off voltage | 2.5 V at room temperature |
| Maximum continuous discharge current | 850 mA |
| Maximum pulse discharge current | 3000 mA |
| Rated capacity | 270 A·s |
| Product weight | Approximately 11.6 g |
| Operating temperature range | -40°C to +85°C |
| Storage conditions | Storage temperature: -40°C to +60°C. |
Manufacturer
SUNJ ENERGY (LUOYANG) CO., LTD.
No. 9 Huoju Avenue, High-Tech Development Zone,
Luoyang 471000, China
Website: www.sunjbattery.com
Email: sunjenergy@sunj.com
Safe Use and Storage
Do not short-circuit, overcharge, over-discharge, reverse polarity, crush, disassemble, incinerate, or immerse in water. Use only within the voltage, current and temperature limits specified by SUNJ.
Use only in circuits designed for this capacitor. Observe the correct polarity and the operating limits in the EPC1530 datasheet. Recharge only using the voltage, current and circuit arrangement specified by SUNJ. The capacitor may retain electrical energy after disconnection; protect its terminals from contact with metal objects or other components. Do not use a damaged or leaking capacitor.
Waste Prevention and End-of-Life Information
Extending the useful life of the capacitor
Operate and charge the capacitor within its specified voltage, current and temperature limits, and store it under the recommended conditions to avoid premature replacement. Do not open, rebuild or repurpose the capacitor yourself. At the end of its useful life, return it to a collection or recycling service that accepts hybrid pulse capacitors.
Separate collection
Collect used hybrid pulse capacitors separately from household waste and other unsorted municipal waste. Do not litter or place them in a general waste bin. Contact a collection or recycling service that accepts this product type and follow its instructions for appropriate treatment and material recovery.
Safe handling of used capacitors
A used capacitor may still retain a charge. Prevent short circuits, which can cause overheating. For intact units, protect exposed terminals with non-conductive tape or individual protective sleeves, without obscuring identification, and follow the collection provider's instructions. Do not short-circuit the terminals to discharge the capacitor. Any discharge required before collection must follow the procedure specified by SUNJ. Keep capacitors dry and away from heat and metal objects. Do not crush or dismantle them. Avoid contact with released contents from a damaged or leaking unit, and obtain handling instructions before collection.
Environmental and health information
Improper disposal can damage capacitors and release substances that may harm people and contaminate soil or water. Separate collection allows controlled treatment and recovery of materials. Do not touch leaked contents or allow them to enter drains or the environment.
Understanding the Label
Crossed-out wheeled bin: The capacitor must be collected separately and must not be discarded as unsorted municipal waste.
EPC1530: Product model identifier.
Hybrid pulse capacitor: A component that stores electrical energy and supplies pulse loads.
Rechargeable: The capacitor can be recharged within the voltage, current, temperature and circuit conditions specified by SUNJ.
Voltage markings, where provided: Identify the operating voltage or voltage limit stated on the product. Follow the limits and charging conditions in the EPC1530 datasheet.
Positive (+) and negative (−) markings: Capacitor polarity. Do not reverse the connections.
Batch code, where provided: Identifies the production batch for traceability.
QR code: Opens this capacitor information page.